Human Soluble Interleukin-1 Receptor-Like 1 (IL1RL1) ELISA Development Kit

A comprehensive kit for developing sandwich ELISA assays to detect Soluble Interleukin-1 Receptor-Like 1 (IL1RL1). The kit contains all necessary reagents for 5 or 15 x 96 tests.

Kit Components:

– Pretreated 96-well ELISA Plate
– Capture Antibody
– Biotin-Conjugated Detection Antibody
– HRP-Conjugate
– Standard (200 ng)

Recommended Accessories:
BTA14652 ELISA Development Support Kit (Sandwich Method)

Buffer Preparation:
For optimal results, prepare the following buffers:

– Coating Buffer: 1X Citrate-Buffered Saline
– Blocking Buffer: 1X PBS containing 0.5-3% BSA
– Wash Buffer: 3% Tris
– Standard and Sample Diluent Buffer: 1X PBS containing 0.5-3% BSA
– Antibody and HRP-Conjugate Diluent Buffer: 1X PBS containing 0.5-3% BSA
– Stop Solution: 5% Sulfuric Acid

Cat. No: 14652

Sizes : 5 × 96 tests
15 × 96 tests

Ask For Details

Category: ELISA Development Kits

Description
Download Manuals

Description

Target	Soluble Interleukin-1 Receptor-Like 1 (IL1RL1)
Reactivity	Human
Tested Applications	ELISA
Recommended dilutions	Capture Antibody: 1/500 – 1/1000, Biotin-conjugated Detection Antibody: 1/500 – 1/1000, HRP-Conjugate: 1/500 – 1/1000. Optimal dilutions/concentrations should be determined by the end user.
Reconstitution	Reconstitute the standard with 1 ml of Standard Diluent to obtain a stock standard solution of 200 ng/ml. Further dilute by a factor of 10 to give the highest standard, 20 ng/ml. Label tubes in preparation for the serial dilutions (10, 5, 2.5, 1.25, 0.625, and 0.313 ng/ml). Aliquot 0.5 ml of the Standard Diluent into each tube. Add 0.5 ml of the highest standard solution into the 1st tube and mix thoroughly. Transfer 0.5 ml from the 1st to 2nd tube, mix thoroughly, and so on.
Storage	Aliquot and store at -20°C in the dark. Avoid repeated freeze/thaw cycles.
UniProt Primary AC	Q01638 (UniProt, ExPASy)
Test Range	0.312 ng/ml – 20 ng/ml
Detection Method	Colormetric
Assay Type	Sandwich
Sample Type	Serum and plasma.
Availability	Shipped within 5-10 working days.
Note	This product is for research use only.
Directions for use	Bring all components to room temperature (18-25°C) and briefly spin or centrifuge the vials before use. Working solutions should be prepared and used immediately. Recommended Procedure: Dilute the Capture Antibody to working concentration using Coating Buffer. Immediately coat the 96-well plate with diluted Capture Antibody (100 µl per well). Seal the plate and incubate at 2-8 °C overnight. Remove the liquid from each well. Do not wash. Block the plate with Blocking Buffer (200 µl per well) at 37 °C for 1 hour. Remove the liquid from each well. Do not wash. Either proceed with the following steps immediately or dry the plate at 37 °C for 30 minutes, then store at -20 °C with dessicant for up to 6 months. Add 100 µl of standards or sample into the appropriate wells. Cover with a plate sealer and incubate at 37 °C for 1.5 hours. Remove the liquid from each well. Do not wash. Add appropriately diluted Biotin-Conjugated Detection Antibody (100 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 1 hour. Remove the liquid from each well. Wash with Wash Buffer (350 µl per well) and allow to soak for 1-2 min. Remove the liquid by inverting and tapping the plate on to absorbent paper. Repeat the wash process 3 times. Add appropriately diluted HRP-Conjugate (100 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 30 min. Repeat the wash process in Step 6, for a total of 5 times. Add Substrate Solution (90 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 15-30 min. Keep the plate in the dark and avoid exposure to light. Add Stop Solution (50 µl per well). Tap the side of the plate to ensure thorough mixing. Measure the absorbance immediately using a microplate reader set at 450 nm.

Research Articles on Soluble Interleukin-1 Receptor-Like 1 (IL1RL1)

Data sheet

SDS

SDS

About Us

Bio Tech Assay is a high-tech biological enterprise, specialise in life science, professional in Immune research.

Quick Links

Product Categories

Primary Antibodies

Secondary Antibodies

Isotype Control

Proteins and Peptides

© 2024. BioTech Assay. All Rights Reserved.

Click outside to hide the comparison bar

Compare